default_mobilelogo

Etter at lagene er påmeldt, kan deltagere og rekkefølge på deltagerne endres etter behov, selv etter påmeldingsfristen. Endringer kan ikke gjøres etter at arrangøren har tatt ut sine data til resultatregistrering, så denne fristen må hentes fra arrangør. Det må være "Eier" av laget som gjør dette, ellers vil ikke laget bli tilgjengelig på skjermen.

Du endrer laget slik:

Logg deg på systemet og klikk på det aktuelle stevnet. Du vil da havne på påmeldingssiden der du har oversikt over dine aktuelle hunder og lag. Klikk på laget og du vil få opp bildet under.

Den grønne haken indikerer at laget er påmeldt OK. Klikk så på den hvite stripen med den grønne haken. slik at du kommer videre til lag detaljene.

 

Her kan du vedlikeholde lag deltagerne med nye hunder, endring av rekkefølge, fjerning av hunder etc. selv etter at påmeldingsfristen er gått. ut. Husk å klikke LAGRE helt nederst før du avslutter. Endringene vil da automatisk komme med på stevnets startlister for lag. 

 

The startlist has many funktiones that hjelps you control the arrangement.

Find dog

If you have a dog on the startline that you do not find on the list, you may seach for it. Put the dogs name or AgiPro ID in the filter field, and your missing dog will appear clear on the startlist. Just click on the dog and you have it for regsitration in the registration picture. 

Add dog

If the dog is booked in the competition you will be able to add it to this run trough the startlist. Click on the + sign and try to type the AgiPro no. or name in the dogs field. If the system finds the dog it will appear with a AGiPro ID  on a list you can chose from. If you cab chose it will automaticly com in field 2. If not you will have tio retype the name in field two. The dog will then be registered with a AgiPro ID starting with ANO- and can be handeled in the system in furtehr competitions and Leagues as log as it is referred to by this number. If the statistics of this dog belongs to a dog with a different AgiPro no. this have to be corrected manually. With this functions you can handel a need for late booking  on the field etc. if nessesary.  If there is a internet connection on the field I will prefer to go through normal booking prosedures or correct the data of the dog with a new skill level to correct the problem This will mailtain the correct statistics of the dog and need no manual corrections. 

In the picure below you will see the dog is not found in the competition data and has to be retyped in bouth fiels. The handler is found (has a AgiPro no.) and can be lifted into field two by picking the riht person. 

Move dog on the list

You can move the dog whereever you want on the statlist by using the drag and drop function. Grip the handle on the left side of the dogline and drag the dog to the right pace. This can come in handy if you have a ahndler with two dogs that have startnumbers close to each other, and want to move either of them. 

Delete dog or place them at the end of the startlist

If you get a message about a bitch i heat and want to put it at the end of the list, do so by clicking on the pencil at the right. Then you will get two new symbols at the left of the dogline. Klick on the handle at the left and the dog is set as the last start on the list. (but it keeps the no. just for historic referances) 

If you want to delete the dog on this run - just click on the cricle with the line and it will disappear from this run. This might be a function to use if the dog shold partisipate in another skill level than it is registered. The dog will then have to be added (+ sign) in the run it will partisipate.

 

 

 

When you start a RingPC you have to log in with your normal AgiPro ID and password. The program is found on C:AgiPro/agipro.exe.

To be able to operate the program the administrator have to define you as a secretary or with admin. rights in the AgiPro online part, parameter setting. When you are logged in you may get a question about the competition password. This is asked only the first time this competition is opened on the PC, to realy veryfy that you have the right competition on this PC. The password is given under the parameter menu part 2 in the online system. Just copy it from there and paste it into the ringPC. Remember to do this before you take the RingPC to a non internett site!

You will then come to a picture where you wil chose witch run you will work with. Click on the right run and you will get question about the standard time and course length. If you do not know, put in 1,1 and go on, but remember to correct this as soon as you know. If you forget this the result will be wrong. You can correct this even after the regsitration if nessesary. When data is entered, click OK to start registration. You will then come to a registration picture with the first starting dog already placed in the picture. 

PICTURE

The Ring PC programs data collection part has 4 pictures you can use.

1. Startlist

2a. Registration faults

2b. Registration time

3. Resultlist

Startlist is an overview where you can see the starting posistin of the dogs in this run. It also makes it possible to change the starting order as we go on. You can also seach for a spesific dog by petname or AgiPro no. and put it on the startline regardless of its startposition. Just click on the dog to take it into the registration picture 1. You can also drag and drop dogs on the startlist (a handle is made all the way to the left side) If you have bitches in heat you acn easy put them at the end of the list using a button for this in the registration picture 1. 

The registration pictures.

There are two registration pictures just to make space enough to use a small touch screen to register results. The program will function on most of computer equipment avaliable. 

The registration picture has some data at the top for recognising the dog and the ahndler doing the run. If the handler has put in a picture of the dog it will show here also. 

If the dog gets a fault or a refusal it is just to click on the field on the screen for this. This can be done either by using a mouse or a touch screen and is has minus fuctions if you register one too much. The number of faults or refusals will show on the screen. As soon as you start typing numbers the computer will enter the other picture and give you a used time registrartion. In this picture you also have touch screen for numbers and you can enter this picture by hitting enter on the first screen if you use touch screen for everything. 

The number registration is interperated as beeing seconds up to two digits. If there is a third or fourth digit typed it will put a comma after the 2. digit and give us a two digit number with 2 desimals. If a fifth number is typed it will giva a tree digit number with 2 desimals. Then hit enter and you are finished. The next dog on the startlist will appear. If you have done a wrong registration of time, push the red delete field and start typing the time again (tis will not erase the faults). This gives us: If you have a clean run - just type the 4 digits of the time, seconds and hudreds of a second then type enter and you are done!  It simply can not be simpler! This gives us a lot of time for control and attention to what is going on in the field. 

Errors are done all the time and you can go back and forth between the two picture simply by clicking on the time field. If the result are on the result list already, just go to the result list, click on the result  on the list and you are back in the registration picture for a new try. If the dog is far down on the result list just type the name or the AGiPro no. in the filter field to find the right dog. 

 If you get the wrong dog in the registration picture for one reason or another, you can click on the delay start button and then get the next dog on the list in the picture. This will put the delayed dog at the end of the startlist. If the current dog is not at the field at all, just register it as absent (special button) and it will not be registererd in this run. A third option is of course much moe frequent used - disqualification (disq,). This alsop have a spesial button and brings the next dog on the registration screen.  

In all this cases the next dog on the startlist will be displayed for registration. If that is not the case you will find futions on the startlist to find the right dog. When you find it, just click on it and start registration. If the next dog is not on the startlist there has to ba reason for that. Find the reason, and correct it. One reason can be that the dog is booked with a wrong skill level. If that is the case you shold be able to find the dog in another run. This gives us that the dog is in the competition, and can be added to this run. (see menu for startlist). 

Belopw you see the registration picture 2, registration of used tme. 

 Resultlist 

is used first of all too control that the registration is done correctly. If you discover faults then you just have to click on the dog and is pulled into teh registration picture for correction. If the standard tme is corrected during the competition it can change the resultlist as well, as the results will be recalculated. If the PC is connected to internett this list will be syncronized with the internett server so the competitors and others can watch the developement of the competiton as teh results are registered. SOme arranging clubs do not want this service, and it can easy be avoided simply by turning off the internet connection in the PC, and turn it back on when the results shall be made avaliable. As soon as the PC gets internett connection it will startn the syncronisation.

This picture also has a few functrion buttons (see picture below.)

Syncronization ring: Click on this to start server syncronization manually. You can use this if you belive there is som problems with the syncronization, but in almost all cases it is not nessesary. 

 Printer: Print out of result list. It comes on screen first and then you can print it on a printer. The printer has to be set as a default printer on the pc. 

If you put this lsit on the screen and then set the PC to renew the screen each 0,5 minit, you will get a continuasly automaticly updated result list. If you set this om a big screen in the competition arena, it can serve as a good service to the competitioors as long as you are connected to the intenet. 

Document - Chose a new run: Click to get the list over avaliable runs on this PC. You can then start a new run. 

Pencil: Can be used to edit the result list. If you use it you can use the crcle with a line to delete results from the list. 

Confirm: A clik on this line brings you to a page where you can confirm the result. It is ment as a confirmation with password from the judge or competition responsible when the run is accepted (Judge formula is signed) This stes the run status to accepted so the viewers can understad that the run is finaly closed. 

 

 

On this page you register and maitain some vital data about your dogs agility career. You set up the skill level your dog compete on under the different competition rules. There might be diffrent rules from one country to another and this have to be adopted here. On the picture we have used the Norwegian Kennel Club (NKK) rules. In other countries this may be a diffrent rule set and may qualify on other skill levels.

In the same picture we also register higth, witch is not the same everywhere either. We also set up the default handler anfd the owner of the dog. Handler can be changed during booking of a competition. This can all be maintained if it changes. Click on the datafield to go into change state. 

Doing changes in hight or skill level will influence on the runs you are allowed to book in a competition. It will also influence on all futeture competitions you already have booked as the automatic in the system connects you with the right run on the right skill level in the competition. If this is changed on a competition you already are booked and there is no other run on the new skill level in this competiton to replace the one you booked, you have a problem that needs to be sorted out manually with the arranging club. 

 

 

When you have set up your own Ring PC for your runs, you can start the Ring PC by logging into your PC the normal way. Go to C: and look for the catalog AgiPro. You will fing a file amrked with a paw called AgiPro.exe. Start the program by clicking on it. (In the future it might be convenient to make startable from your PC desk.) Yoiu will be asked to log into the program, and do so by using your normal AgiPro user and password. You must be  defined as a competition administrator, judge or secretary to do this. 

 

BE AWARE: If this is the first time you start the program after the creation of the Ring PC you will be asked to enter a start key for the program. This is done to ensure that you have the right dataset in the pc. This way you will not mix up the dtata with previous datasets in the same computer. Yiu will find the password under competition parameters in the server (internet) program. Just copy it and paste it here. That is why it is a good idea to open the program the first time when you are still on the internett. When the code is entered once you will come directly to the program menu the next time. 

In the picture above you can see how you pick the data for your ring, so you do not have to be disturbed by other data. Just pick the right ring no. in the filter field. You can also use the other filter to pick the right class or run by seaching for agility or jump runs. 

In the first column in the run line (white) you can se a status of this run.  This might be: 

* Sitting dog. = run has not started

* Running dog = run has started but is not finished.

* Flag = løpet is finished

Click on the run you will do registration for. You will enter a picture where you will give std. time and length of the course. This have to be set, so if you do not know for the time, set 1 to bouth fields and confirm. This will make it obvious to you later that it is wrong and have to be entered at a later ritme. If it is not set right the calculation of the result  will be wrong. It can be altered at any time, and the result will be recalculated automaticly. 

 

When this is done you come to the startlist of registration module (Ring PC). The module is divided in 3 mail pictures, startlist, registration and resultlist. For further instructions about how to use this pictures effectively, go to the Result registration menu in agipro.info to read more.